Screw-on sleeve, split
BB split screw-on sleeves are used as a two-part component to secure the position of vertical wooden components. It is designed so that the wood support is vertical. A solid base material such as reinforced concrete foundations is provided as the base of the fastening. The lugs are mounted at a 90° angle and are of equal length, meaning that the split screw-on sleeves can also be used across the corner for uneven beams.
Installation
The mounting is carried out in the ground using suitable heavy-duty anchors. The diameter of the wood screws for mounting in the floor must not exceed 11 mm.
Approval
The split screw-on sleeves from BB Stanz- und Umformtechnik have the European Technical Approval ETA-13/0026.
Steel quality
- DD11
- Yield strength ReH ≥ 170-340 N/mm²
- Tensile strength Rm ≥ 440 N/mm²
- Elongation at break A80 ≥ 28 %
- Corrosion protection: Hot-dip galvanised corresponding to a zinc layer thickness of approx. 55 µm